Commercial Stainless Steel Saucepan and Stockpot Set | 304 SS (18/8)

Manufactured from food-grade 304 stainless steel (18/8) with a mirror-polished body and solid stainless steel handles, this commercial saucepan and stockpot set is designed for high-volume foodservice environments and branded kitchenware programs. CharmsCook has supplied stainless steel cookware to wholesale buyers and OEM brands across Europe, North America, and Australia since 1989, with full FDA and LFGB compliance documentation available on request.

Product Specifications

This set covers saucepan and stockpot configurations across a standard commercial diameter range, with induction compatibility delivered through an impact-bonded magnetic base.

Material & Construction

304 stainless steel (18/8) contains approximately 18% chromium and 8% nickel — the composition that places it in the austenitic category and provides corrosion resistance adequate for prolonged contact with acidic foods, saline broths, and high-temperature cooking conditions. The 18/8 designation is consistent with ASTM A240 grade 304 (Cr: 17.5–19.5%, Ni: 8.0–10.5%).

The exterior carries a mirror-polished finish applied through multi-stage mechanical buffing, which reduces surface porosity, simplifies sanitation, and meets the visual standards required by retail and foodservice buyers in European and North American markets. Handles are fabricated from the same 304 SS stock and attached via solid rivets, producing a mechanically stable joint that withstands repeated thermal cycling in commercial dishwasher and oven environments.

Induction compatibility is achieved through a factory-applied impact-bonded ferritic steel base disc. Because 304 SS is an austenitic alloy, it is non-magnetic in its annealed state and does not generate eddy currents on induction hobs without this additional layer. The bonded base provides the magnetic coupling required for induction operation while keeping the food-contact interior surfaces as 304 SS throughout.

OEM & Custom Manufacturing

CharmsCook supports full OEM and ODM programs for stainless steel saucepan and stockpot sets, from single-SKU private label to configured multi-piece sets with custom packaging.

Customization options:

• Logo: laser engraving, machine embossing, chemical etching, or stamped medallion inset
• Diameter & capacity: custom sizes available outside the standard 16–36 cm range
• Surface finish: mirror polish (standard), brushed/satin, or sandblasted
• Handle: length, angle, grip configuration, and secondary helper handles for large stockpot sizes
• Set composition: define piece count and size mix per set (e.g., 3-piece, 5-piece, 7-piece)
• Packaging: retail gift box, bulk carton, foam-insert protective pack, or fully custom retail packaging

Program timeline:

• Samples: 7–15 business days after specification confirmation
• Bulk production: 30–45 days after sample approval
• Documentation available: FDA compliance letter, LFGB test report, SGS third-party inspection report

Procurement teams and importers can submit product specifications directly via the RFQ form for a technical feasibility review and lead time confirmation.

Applications

This commercial saucepan and stockpot set is supplied to buyers operating across foodservice, retail, and branded kitchenware channels.

• Commercial kitchens: 304 SS saucepan and stockpot sets handle the daily volume demands of restaurants, canteens, and catering operations without surface degradation under continuous use.
• Hotels & catering companies: Consistent sizing across a set simplifies storage and inventory tracking for banquet and large-event operations.
• Retail brands: Mirror-polished 304 SS sets meet the category requirements for mid-to-upper cookware assortments in European and North American retail channels.
• Amazon and e-commerce sellers: Induction-ready, FDA and LFGB compliant 304 SS sets satisfy marketplace listing standards and reduce return risk on material and compatibility grounds.
• Foodservice distributors: Bulk-packed set configurations allow distributors to break sets for individual-piece restaurant supply programs.
• Culinary schools: Dimensional consistency and mechanical durability make these sets suitable for high-turnover training environments with shared daily use.

Frequently Asked Questions

Q: What stainless steel grade is used in this saucepan and stockpot set?
A: The body and handles are manufactured from 304 stainless steel, designated 18/8, which indicates approximately 18% chromium and 8% nickel. This grade meets food-contact material requirements under FDA 21 CFR and EU Regulation 10/2011, and is a standard specification for commercial and retail cookware.

Q: How does induction compatibility work with a 304 stainless steel pot?
A: 304 stainless steel is an austenitic alloy and is non-magnetic in its annealed state, so it does not couple with induction hobs directly. Induction compatibility is achieved via a factory impact-bonded ferritic steel base disc on each piece, which provides the magnetic layer required to activate induction elements while the 304 SS interior remains the food-contact surface throughout.

Q: What is the MOQ for a bulk or custom order?
A: MOQ varies based on set configuration, piece count, and customization requirements. Buyers should submit an RFQ with the target SKU mix and any custom specifications for a specific MOQ and production timeline from the CharmsCook team.

Q: Do you offer OEM and private-label services for this cookware set?
A: Yes. CharmsCook handles OEM programs covering logo engraving, custom size configurations, surface finish variations, and full private-label packaging. Sample lead time is 7–15 business days; bulk production runs 30–45 days from sample approval.

Q: What certifications does this cookware comply with?
A: FDA (21 CFR, food-contact materials) and LFGB (German food safety standard, widely accepted across the EU). SGS third-party test reports are available for buyers requiring independent material verification.

Q: Can buyers receive a production sample before committing to a bulk order?
A: Samples are available on request. Production samples typically ship within 7–15 business days depending on the specification scope. Initiate a sample request through the CharmsCook RFQ form.

Q: What stovetops is this cookware set compatible with?
A: Gas, electric coil, ceramic, halogen, and induction. Induction compatibility is provided by the impact-bonded magnetic base applied to each piece during manufacturing.

Q: What customization options are available for the handles?
A: Standard handles are solid 304 stainless steel with riveted attachment and mirror-polished finish. Through the OEM program, buyers can specify handle length, attachment angle, surface finish (mirror or brushed), and secondary helper handles on larger stockpot sizes.